D-Link DGS-3000 - Page 468

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
464
show jwac user 42-24
Description
This command is used to display JWAC users in the local database.
Format
show jwac user
Parameters
None.
Restrictions
None.
Example
To display the current JWAC local users:
DGS-3000-26TC:admin#show jwac user
Command: show jwac user
User Name Password VID
---------------- ---------------- ----------
112233 112233 -
123 123 1
Total Entries:2
DGS-3000-26TC:admin#
clear jwac auth_state 42-25
Description
This command is used to clear authentication entries.
Format
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating | blocked} |
mac_addr <macaddr>]
Parameters
ports - Specify the port range to delete hosts on.
all - Specify to delete all ports.
<portlist> - Enter range of ports to delete.
authenticated - (Optional) Specify the state of host to delete.