DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
463
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a JWAC user:
DGS-3000-26TC:admin#config jwac user 112233
Command: config jwac user 112233
Enter a old password:****
Enter a case-sensitive new password: ****
Enter the new password again for confirmation: ****
Success.
delete jwac 42-23
Description
This command is used to delete JWAC users from the local database.
Format
delete jwac [user <username 15> | all_users]
Parameters
user - Specify the user name to be deleted.
<username 15> - Enter the user name to be deleted. The user name can be up to 15
all_users - Specify all user accounts in the local database will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a JWAC user from the local database:
DGS-3000-26TC:admin#delete jwac user 112233
Command: delete jwac user 112233
Success.
To Next Page
Loading...
