D-Link DGS-3000 - Page 522

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
518
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable mac_notification function:
DGS-3000-26TC:admin#disable mac_notification
Command: disable mac_notification
Success.
DGS-3000-26TC:admin#
config mac_notification 48-3
Description
This command is used to configure the Switch’s MAC address table notification global settings.
Format
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}
Parameters
interval - (Optional) Specify the time in seconds between notifications.
<sec 1-2147483647> - Enter the interval time here. This value must be between 1 and
2147483647 seconds.
historysize - (Optional) Specify the maximum number of entries listed in the history log used for
notification. Up to 500 entries can be specified.
<int 1-500> - Enter the history log size here. This value must be between 1 and 500.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To config the Switch’s Mac address table notification global settings: