D-Link DGS-3000 - Page 538

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
534
show mac_based_access_control 49-15
Description
This command is used to display the MAC-based Access Control setting.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports - (Optional) Displays the MAC-based Access Control settings for a specific port or range of
ports.
<portlist> - Enter the list of port used for this configuration here.
If no parameter is specified, the global MAC-based Access Control settings will be displayed.
Restrictions
None.
Example
To show the MAC-based Access Control port configuration for ports 1 to 4:
DGS-3000-26TC:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time Block Time Auth Mode Max User
(min) (sec)
----- -------- ---------- --------- ---------- --------
1 Disabled 1440 300 Host-based 128
2 Disabled 1440 300 Host-based 128
3 Disabled 1440 300 Host-based 128
4 Disabled 1440 300 Host-based 128
DGS-3000-26TC:admin#
show mac_based_access_control_local 49-16
Description
This command is used to display the MAC-based Access Control local database entry(s).
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}