D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
537
config mac_based_access_control trap state 49-19
Description
This command is used to enable or disable sending of MAC-based Access Control traps.
Format
config mac_based_access_control trap state [enable | disable]
Parameters
enable - Enables trap for MAC-based Access Control. The trap of MAC-based Access Control
will be sent out.
disable - Disables trap for MAC-based Access Control.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable trap state of MAC-based Access Control:
DGS-3000-26TC:admin#config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DGS-3000-26TC:admin#
config mac_based_access_control log state 49-20
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Enables log for MAC-based Access Control. The log of MAC-based Access Control will
be generated.
disable - Disables log for MAC-based Access Control.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.