DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
551
DGS-3000-26TC:admin#disable mld_snooping
Command: disable mld_snooping
Success.
show mld_snooping 52-7
Description
This command is used to display the current MLD snooping configuration on the Switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view the MLD snooping
configuration.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the MLD snooping
<vlanid_list> - Enter the VLAN ID list here.
If VLAN is not specified, the system will display all current MLD snooping configurations.
Restrictions
None.
Example
To show MLD snooping:
To Next Page