DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
550
member port of the multicast group that the port is reported, and the router will be a default
member of this multicast group. The multicast packet destined for this multicast group will be
forwarded to all the members of this multicast group.
Format
enable mld_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable MLD snooping on the Switch:
DGS-3000-26TC:admin#enable mld_snooping
Command: enable mld_snooping
Success.
disable mld_snooping 52-6
Description
This command is used to disable MLD snooping on the Switch. Disabling MLD snooping allows all
MLD and IP multicast traffic to flood within a given IP interface. Note that disabling MLD snooping
will also disable the forward multicast router only function.
Format
disable mld_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable MLD snooping on the Switch:
To Next Page
Loading...
Need help?
General