D-Link DGS-3000 - Page 617

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
613
delete stp instance_id 56-7
Description
This command is used to delete an MST Instance.
Format
delete stp instance_id <value 1-7>
Parameters
instance_id - Specify the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-7> - Enter the MSTP instance ID here. This value must be between 1 and 7.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an MSTP instance:
DGS-3000-26TC:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-3000-26TC:admin#
config stp mst_config_id 56-8
Description
This command is used to change the name or the revision level of the MST configuration
identification.
Format
config stp mst_config_id {revision_level <int 0-65535> | name <string>}
Parameters
revision_level - (Optional) The same given name with different revision level also represents
different MST regions.
<int 0-65535> - Enter the revision level here. This value must be between 0 and 65535.
name - (Optional) Specify the name given for a specific MST region.
<string> - Enter the MST region name here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.