D-Link DGS-3000 - Page 703

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
699
Example
In case of project support per port configure, show DSCP map configuration on port 1.
DGS-3000-26TC:admin#show dscp map 1 dscp_dscp
Command: show dscp map 1 dscp_dscp
DSCP to DSCP Mapping:
--------------------------------------------------------------
Port 1 | 0 1 2 3 4 5 6 7 8 9
-----------+--------------------------------------------------
0 | 0 1 2 3 4 5 6 7 8 9
1 | 10 11 12 13 14 15 16 17 18 19
2 | 20 21 22 23 24 25 26 27 28 29
3 | 30 31 32 33 34 35 36 37 38 39
4 | 40 41 42 43 44 45 46 47 48 49
5 | 50 51 52 53 54 55 56 57 58 59
6 | 60 61 62 63
--------------------------------------------------------------
DGS-3000-26TC:admin#
show 802.1p queue statistics port 69-19
Description
This command is used to display the per queue counters for each port.
Format
show 802.1p queue statistics port <port>
Parameters
<port> - Enter the port to be displayed.
Restrictions
None.
Example
To display the per queue counters for port 10: