DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
700
DGS-3000-26TC:admin#show 802.1p queue statistics port 10
Command: show 802.1p queue statistics port 10
Notes:
(1)Min Bandwidth: minimum bandwidth setting, associated with per queue
bandwidth control, if user doesn't configure it, the min bandwidth will be 0.
(2)Max Bandwidth: maximum bandwidth setting, associated with per queue
bandwidth control, if user doesn't configure it, the max bandwidth will be the
current port's link speed.
Queue Min Bandwidth Packets/sec Total packets
Max Bandwidth Bytes/sec Total Bytes
-----------------------------------------------------------
0 0 0 0
0 0 0
-----------------------------------------------------------
1 0 0 0
0 0 0
-----------------------------------------------------------
2 0 0 0
0 0 0
-----------------------------------------------------------
3 0 0 0
0 0 0
-----------------------------------------------------------
4 0 0 0
0 0 0
-----------------------------------------------------------
5 0 0 0
0 0 0
-----------------------------------------------------------
To Next Page
Loading...
