D-Link DGS-3000 - Page 774

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
770
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3000-26TC:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3000-26TC:admin#
disable snmp authenticate_traps 78-31
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP authentication trap support:
DGS-3000-26TC:admin#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3000-26TC:admin#