DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
785
DGS-3000-26TC:admin#show sim neighbor
Command: show sim neighbor
Neighbor Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
reconfig 80-4
Description
This command is used to re-Telnet to member.
Format
reconfig {member_id <value 1-32> | exit}
Parameters
member_id - (Optional) Specify the serial number of the member.
<value 1-32> - Enter the serial number of the member here.
exit - (Optional) Specify to exit from the Telnet session.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To re-Telnet to member:
DGS-3000-26TC:admin#reconfig member_id 1
Command: reconfig member_id 1
DGS-3000-26TC:admin#
config sim_group 80-5
Description
This command is used to configure group information.
To Next Page
Loading...
