DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
790
upload sim_ms 80-8
Description
This command is used to upload configuration or logs from indicated devices to the TFTP server.
Format
upload sim_ms [configuration_to_tftp | log_to_tftp] {[<ipaddr> | <ipv6addr>]
<path_filename> {[ members <mslist> | all]}}
Parameters
configuration_to_tftp - Specify to upload configuration to a TFTP server.
log_to_tftp - Specify to upload a log to a TFTP server.
<ipaddr> - (Optional) Enter the IPv4 address of TFTP server.
<ipv6addr> - (Optional) Enter the IPv6 address of TFTP server.
<path_filename> - (Optional) Enter the file path to store configuration in TFTP server.
members - (Optional) Specifiy the members which upload its configuration.
<mslist> - Enter the members which upload its configuration.The value is from 1 to 32.
all - (Optional) Specify all members which upload its configuration.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To upload configuration:
DGS-3000-26TC:admin#upload sim_ms configuration_to_tftp 10.55.47.1 D:\config.cfg
members 1
Command: upload sim_ms configuration_to_tftp 10.55.47.1 D:\config.cfg members 1
Done.
To upload log via IPv6:
DGS-3000-26TC:admin#upload sim_ms log_to_tftp 2001::1234 D:\log.txt members 1
Command: upload sim_ms log_to_tftp 2001::1234 D:\log.txt members 1
This device is uploading log. Please wait several minutes ...
Upload Status :
ID MAC Address Result
--- ----------------- ----------------
00-01-02-03-04-00 Success
To Next Page
Loading...
