D-Link DGS-3000 - Page 795

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
791
config sim trap 80-9
Description
This command is used to control sending of traps issued from the member switch.
Format
config sim trap [enable | disable]
Parameters
enable - Enable the trap state.
disable - Disable the trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SIM trap:
DGS-3000-26TC:admin#config sim trap enable
Command: config sim trap enable
Success.
DGS-3000-26TC:admin#