D-Link DGS-3000 - Page 800

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
796
DGS-3000-26TC:admin# show super_vlan
Command: show super_vlan
Super VID : 3
VLAN Name : super3
IP Subnet: 172.6.0.254/16
Status : Inactive
Sub VID : 200-204
Total Entries: 1
DGS-3000-26TC:admin#
show sub_vlan 81-6
Description
This command is used to show sub_VLAN.
Format
show sub_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Parameters
<vlan_name 32> - (Optional) Enter the sub_VLAN name used here. This name can be up to 32
characters long.
vlanid - (Optional) Specify the sub_VLAN ID used.
<vidlist> - Enter the sub_VLAN ID used here. This value must be between 1 and 4094. If the
sub_vlan VLAN is not specified, all sub_vlans will be displayed.
Restrictions
None.
Example
To show all sub_VLAN: