D-Link DGS-3000 - Page 799

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
795
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure IP range of sub VLAN 1 to 10.1.1.1-10.1.1.3:
DGS-3000-26TC:admin# config sub_vlan vlanid 1 add ip_range 10.1.1.1 to 10.1.1.3
Command: config sub_vlan vlanid 1 add ip_range 10.1.1.1 to 10.1.1.3
Success.
DGS-3000-26TC:admin#
show super_vlan 81-5
Description
This command is used to display the super VLAN parameters.
Format
show super_vlan {[<vlan_name 32> | vlanid <vlanid 1-4094>]}
Parameters
<vlan_name 32> - (Optional) Enter the super VLAN name used here. This name can be up to 32
characters long.
vlanid - (Optional) Specify the super VLAN ID used.
<vlanid 1-4094> - Enter the super VLAN ID used here. This value must be between 1 and
4094. If the super VLAN is not specified, all super VLANs will be displayed
Restrictions
None.
Example
To show super VLAN: