D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
77
show authen server_host 5-25
Description
This command is used to display the authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display all authentication server hosts:
DGS-3000-26TC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- ---------- -------------------------
10.1.1.222 tacacs+ 15555 10 ------ This is a secret.
Total Entries : 1
DGS-3000-26TC:admin#
config authen parameter response_timeout 5-26
Description
This command is used to configure the amount of time waiting or user input on console, Telnet,
SSH application.
Format
config authen parameter response_timeout <int 0-255>
Parameters
<int 0-255> - Enter the timeout response time for user input on console, Telnet or SSH. 0 means
there is no time out. This value must be between 0 and 255. Default value is 30 seconds.
Restrictions
Only Administrators can issue this command.