D-Link DGS-3000 - Page 85

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
81
create accounting method_list_name 5-31
Description
This command is used to create a user-defined list of accounting methods for accounting services
on the Switch. The maximum supported number of accounting method lists is 8.
Format
create accounting method_list_name <string 15>
Parameters
<string 15> - Enter the built-in or user-defined method list.
Restrictions
Only Administrators can issue this command.
Example
To create a user-defined accounting method list called “shell_acct”:
DGS-3000-26TC:admin#create accounting method_list_name shell_acct
Command: create accounting method_list_name shell_acct
Success.
DGS-3000-26TC:admin#
config accounting 5-32
Description
This command is used to configure a user-defined or default method list of accounting methods.
Format
config accounting [default | method_list_name <string 15>] method {tacacs+ | radius |
server_group <string 15> | none}
Parameters
default - Specify the default method list of accounting methods.
method_list_name - Specify the user-defined method list of accounting methods.
<string 15> - Enter the name of the method list.
method - Specify the protocol.
tacacs+ - Specify the built-in TACACS+ server group.
radius – Specify the built-in RADIUS server group.
server_group - Specify the user-defined server group. If the group contains TACACS and
XTACACS server, it will be skipped in accounting.
<string 15> - Enter the name of server group.
none - Specify no accounting.