DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
82
Restrictions
Only Administrators can issue this command.
Example
To configure a user-defined method list called “shell_acct”, that Specify a sequence of the built-in
TACACS+ server group, followed by the RADIUS server group for accounting service on the
Switch:
DGS-3000-26TC:admin#config accounting method_list_name shell_acct method
tacacs+ radius
Command: config accounting method_list_name shell_acct method tacacs+ radius
Success.
delete accounting method_list_name 5-33
Description
This command is used to delete a user-defined method list of accounting methods.
Format
delete accounting method_list_name <string 15>
Parameters
<string 15> - Enter the built-in or user-defined method list.
Restrictions
Only Administrators can issue this command.
Example
To delete the user-defined accounting method list called “shell_acct” from the Switch:
DGS-3000-26TC:admin#delete accounting method_list_name shell_acct
Command: delete accounting method_list_name shell_acct
Success.
To Next Page
Loading...
