D-Link DGS-3000 - Page 882

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
878
DGS-3000-26TC:admin# clear wac auth_state ports 1-5
Command: clear wac auth_state ports 1-5
Success.
DGS-3000-26TC:admin#
config wac authentication_page element 95-18
Description
This command is used to customize the authenticate page elements.
Format
config wac authentication_page element [default | page_title <desc 128> |
login_window_title <desc 64> | user_name_title <desc 32> | password_title <desc 32> |
logout_window_title <desc 64> | notification_line <value 1-5> <desc 128>]
Parameters
default - Specify to reset the page elements to default.
page_title - Specify to configure the title of the authentication page.
<desc 128> - Enter the page title used here. This value can be up to 128 characters long.
login_window_title - Specify to configure the login window title of the authentication page
<desc 64> - Enter the login window title used here. This value can be up to 64 characters
long.
user_name_title - Specify to configure the user name title of the authentication page
<desc 32> - Enter the user name title used here. This value can be up to 32 characters long.
password_title - Specify to configure the password title of the authentication page.
<desc 32> - Enter the password title used here. This value can be up to 32 characters long.
logout_window_title - Specify to configure the logout window title of the authentication page.
<desc 64> - Enter the lohout window title used here. This value can be up to 64 characters
long.
notification_line - Specify to set the notification information by line in authentication Web pages.
<value 1-5> - Enter the notification line number used here. This value must be between 1 and
5.
<desc 128> - Enter the notification line description used here. This value can be up to 128
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To customize the authenticate page elements: