o Fixed: Displays without backup batteries would not always automatically
restart if their input voltage dropped below 10V (for example, during engine
crank.)
First revision of the SkyView System Installation Guide that is electronic-only, included
on USB flash drives packages with SkyView displays, and posted to Dynon Avionics
website.
Added SV-D1000T touch setup (Page 4-28)
Added SV-AP-PANEL installation (Section 17)
Added SV-KNOB-PANEL installation (Section 18)
Added information about Transponder software update to v2.04 (Page 11-20)
Setup for dual SV-EMS-220/221 to monitor all cylinders of a 9-cylinder radial engine
(Pages 7-29, 7-30, 7-31)
Added setup for monitoring dual engines with dual SV-EMS-220/221 and at least two
SkyView displays (Page 7-32)
Added Contacts Used for Landing Gear section (Page 7-56)
Added additional color choices in EMS ranges, choices now include Blue, Cyan, Orange,
Violet, White, and Yellow. (Page 7-64)
Added and updated serial connection details for Garmin / Apollo SL30 COM/NAV radio,
Garmin / Apollo SL40 COM radio, Val Avionics NAV 2000 NAV radio, Icom IC-A210 COM
radio, MGL V6/V10 COM radio, and Trig TY91 COM radio (Pages 4-16 through 4-18)
Added GPS and NAV devices can now be named with a user selectable seven-character
name instead of POS x, NAV x, GPS x
Added explanation of new ALLOW AUTO SWITCH in setup of SV-ARINC-429 (Page 12-
11)
Added explanation of software upgrade cannot proceed if previously configured
SkyView Network devices are not connected (Page 3-15 and 3-16)
Added extensive Harness Construction Notes for connecting single and dual SV-COM-
C25s to an SV-INTERCOM-2S. (Section 16)
Added procedure for adjusting 912 iS CAN fuel flow reported to SkyView Fuel
Computer (Page 7-28)
Added caution not to over-torque fasteners used to mount SV-BAT-320 (Page 9-2)
Added information to display VP-X BATT VOLTS widget in EMS display (Page 11-14)
Added information on using “FTP client” to download very large terrain database files
(Page 6-3).
Added information about Rotax 914 EGT sensors (Page 7-35)
Added information about Rotax 914 fuel pressure sensor (Page 7-39)
Added SV-EMS-220 / 221 is required for display of VP-X information (Page 13-1)
Added that Altitude Encoder output for Garmin SL70 is supported (Page 4-15)
Added Kavlico Pressure Sensor Manufacturer Part Numbers (Appendix G)
Improved TSO / Part 23 applicability statement (cover)
Improved guidance for installation of SV-GPS-250 (Page 2-10 and Page 8-2)
Improved information about Rotax 914 air box temperature sensor (Page 7-55)
Improved guidance that SV-XPNDR-262, even after Software update, will not meet the
requirements of the FAA 2020 ADS-B “mandate” (Section 11 - SV-XPNDR-261/262
Installation, Configuration, and Testing)
Improved guidance that ADAHRS/EMS/SYSTEM/NMEA Serial Output must be
connected to all SkyView displays. Updated similar guidance for other devices
connected via serial port, made language consistent on all devices connected via serial
port. (Pages 4-11 through 4-19)
Improved guidance for installation of External LEVEL Button (Page 10-13)
Improved guidance on monitoring Heated Pitot status (Page 15-7)
Corrected: SV-COM-C25 Sensitivity (Page 18-6)
Corrected: To use Garmin 330ES with SV-ADSB-470, setting HEX CODE procedure is
required for all software versions (Page 14-1)
361 pages
To Next Page
Loading...
