Fujitsu 1FINITY L100 - Page 144

s8104ac_2
Figure 76
Measuring Voltage
Important: If the voltage is not between –40 and –57 V DC, contact the installaon group or
appropriate supervisor/manager, as applicable, before proceeding. Aer the trouble has been
corrected, repeat Step 4.
Step 5
Measure the voltage between the MAIN B and GB terminals on the power adapter.
Step 6
Replace the protecon cover.
Equipment Installation
Install Power Cables
144
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only