Fujitsu 1FINITY L100 - Page 305

Enty Type Severity
Service
Aected
Direcon Locaon Descripon
AC00-F011 minor non–service-
aecng
n/a NEND Mismatch of Equipment and Aributes:
TYPE=<unit type>
Probable Cause Suggested Correcve Acon
■ A Fan unit is mismounted.
■ A Fan unit slot is not provisioned
correctly.
1. Remove and remount the Fan unit.
2. Correct the Fan unit slot provisioning.
BDL1-3B11, BDL1-3R11,
1GEX, 1GEBT
major non–service-
aecng
n/a NEND Interblade communicaon Miscabled
Connecon: TYPE = <unit type>
Probable Cause Suggested Correcve Acon
The interblade communicaon cables are
not installed correctly.
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
PIL1-3PS2 warning non–service-
aecng
n/a NEND Mismatch of Equipment and Aributes:
TYPE=<unit type> and the admin-status is
down
Probable Cause Suggested Correcve Acon
■ The PIU installed in the specied slot is
mismounted.
■ The PIU does not match the slot for
which it is provisioned.
1. Remove and remount the PIU module.
2. Replace the PIU module with the correct PIU module.
PIL1-3PS2 minor non–service-
aecng
n/a NEND Mismatch of Equipment and Aributes:
TYPE=<unit type>
Probable Cause Suggested Correcve Acon
■ The PIU installed in the specied slot is
mismounted.
■ The PIU does not match the slot for
which it is provisioned.
1. Remove and remount the SFP module.
2. Replace the SFP module with the correct SFP module.
BDL1-3B11, BDL1-3R11,
1GEX, 1GEBT
major non–service-
aecng
n/a NEND Interblade communicaon Miscabled
Connecon: TYPE = <unit type>
Probable Cause Suggested Correcve Acon
The interblade communicaon cables are
not installed correctly.
1. Remove and remount the PIU.
2. Replace the PIU with the correct PIU.
System Maintenance
Trouble Clearing
305
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only