Enty Type Severity
Service
Aected
Direcon Locaon Descripon
1GEX crical non–service-
aecng
transmit NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated transmit
1GEX interface is too high.
None
1GEX crical non–service-
aecng
receive NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated receive
1GEX interface is too high.
Check the opcal receive power at the indicated port.
1GEBT minor non–service-
aecng
transmit NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated transmit
1GEBT interface is too high.
Check the opcal transmit power at the indicated port.
1GEBT minor non–service-
aecng
receive NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated receive
1GEBT interface is too high.
Check the opcal receive power at the indicated port.
1GEBT crical non–service-
aecng
transmit NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated transmit
1GEBT interface is too high.
Check the opcal transmit power at the indicated port.
1GEBT crical non–service-
aecng
receive NEND Power Out of Specicaon–High: TYPE =
<unit type>
Probable Cause Suggested Correcve Acon
The opcal power on the indicated receive
1GEBT interface is too high.
Check the opcal receive power at the indicated port.
System Maintenance
Trouble Clearing
327
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only