1st Previous Day
2nd Previous Day
3rd Previous Day
4th Previous Day
5th Previous Day
6th Previous Day
29th Previous Day
30th Previous Day
31st Previous Day
32nd Previous Day
Current Day
Registers
Aug. 2
0:00 - 9:18
Aug. 1
0:00 - 24:00
July 31
0:00 - 24:00
July 30
0:00 - 24:00
July 29
0:00 - 24:00
July 28
0:00 - 24:00
July 27
0:00 - 24:00
July 4
0:00 - 24:00
July 3
0:00 - 24:00
July 2
0:00 - 24:00
July 1
0:00 - 24:00
Aug. 2
0:00 - 9:18
Aug. 1
0:00 - 24:00
July 31
0:00 - 24:00
July 30
0:00 - 24:00
July 29
0:00 - 24:00
July 28
0:00 - 24:00
July 5
0:00 - 24:00
July 4
0:00 - 24:00
July 3
0:00 - 24:00
July 2
0:00 - 24:00
Throw Away
Period of Each Register Content
NOW=Aug.2
24:00
NOW=Aug.2
9:18
s9501zn_1
Figure 111
Performance Registers—Current Day and Previous 32 Days
For some med parameters, Threshold Crossing Alerts (TCAs) are generated when the PM count exceeds a
preset threshold. For other med parameters, thresholds are not supported, and these registers can hold up to
2
63
–1 counts before automacally rolling back to a value of 1 when the maximum count is exceeded.
The current med registers store the number of events within their specied me limits and forward that
informaon to the rst previous register before they are inialized, for example, informaon from the rst
previous register is passed on to the second previous register and informaon from the second previous register
is passed on to the third previous register. Informaon from the last previous register is discarded.
The following abbreviaons are used in the performance monitoring counter tables in this secon:
RX Receive
TX Transmit
System Maintenance
Performance Monitoring Counters
347
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
Need help?
General