Fujitsu 1FINITY L100 - Page 393

Step 18
Pull the power terminal adapter up and away from the blade.
Figure 144
Pulling Power Terminal Adapter
Step 19
Before unpacking the replacement blade, inspect the shipping containers for signs of damage.
Note: Claims for shipping damage must be led with the transportaon company in accordance with their
published procedure. Contact Fujitsu Sales Representave for any shipment quesons.
Step 20
Unpack and carefully remove the replacement blade from its shipping container and place it on a clean, level,
and ESD-safe surface. Use two hands as shown in the following gure to remove a blade unit from container.
Note: Leave the blade in the ESD-protecve plasc bag unl ready for installaon.
System Maintenance
Equipment Replacement
393
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only