Fujitsu 1FINITY L100 - Page 4

4 Equipment Installaon p. 101
4.1 Precauons p. 102
4.2 Site Selecon p. 103
4.3 Unpack and Inspect Equipment p. 104
4.4 Adjustable Range of Rack Brackets p. 106
4.5 Install 19-Inch, 2-Post Rack Rail Kit p. 107
4.6 Install 23-Inch, 2-Post Rack Rail Kit p. 113
4.7 Install 19-Inch, 4-Post Rack Rail Kit p. 119
4.8 Install 23-Inch, 4-Post Rack Rail Kit p. 125
4.9 Install Power Terminal Adapter p. 131
4.10 Install Blade in Housing p. 136
4.11 Recer and Blade Wiring Connecons p. 139
4.12 Install Power Cables p. 141
4.13 Install Fan Unit p. 146
4.14 Install Plug-In Unit p. 148
4.15 Install SFP Module p. 151
4.16 Install Filler Panel p. 152
4.17 Install Data Communicaon Network Cabling p. 154
4.18 Install Local Management Port Cabling p. 155
4.19 Install CD ROADM Cabling p. 156
4.20 Install L160 Raman Cabling p. 157
5 Inial System Turn Up p. 159
5.1 Log On p. 160
5.2 Set Up Main Blade (Inial) p. 162
5.3 Set WDM Conguraon p. 164
5.4 CONSOLE Port (Serial Port) p. 165
5.4.1 Enable/Disable CONSOLE Logon p. 165
5.4.2 CONSOLE Log On p. 166
5.5 Congure OSPF Roung p. 168
5.6 Congure IP Connecon to DCN p. 169
5.6.1 Congure LCN1 with Stac IP Address p. 170
Set Stac IP Address on LCN1 p. 171
Congure Next-Hop p. 171
Connect LCN1 to DCN p. 172
5.6.2 Congure LCN1 with DHCP p. 173
Congure Next-Hop p. 174
Connect LCN1 to DCN p. 175
Idenfy IP Address Assigned to LCN1 by DHCP p. 175
5.6.3 Congure IP Connecon Through OSC p. 176
Congure NEM Interface p. 180
Congure IP Interfaces for OSC Links p. 180
Congure OSPF Roung p. 182
4
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only