Step 11
Store the blade in ESD-protecve packaging.
Note: Follow local pracce/procedures for repair or replacement of equipment, as applicable.
Step 12
Before unpacking the replacement blade, inspect the shipping containers for signs of damage.
Note: Claims for shipping damage must be led with the transportaon company in accordance with their
published procedure. Contact Fujitsu Sales Representave for any shipment quesons.
Step 13
Unpack and carefully remove the replacement blade from its shipping container and place it on a clean, level,
and ESD-safe surface. Use two hands as shown in the following gure to remove a blade unit from container.
Note: Leave the blade in the ESD-protecve plasc bag unl ready for installaon.
Fiber Management Arm
Do not lift here. Do not lift here.
Lift here. Lift here.
s8102bb_1
Figure 162
Removing Blade from Packing Container
Step 14
Inspect the equipment to ensure that it is free of any defects, damage, or other debris. If the equipment is
damaged, follow local pracces/procedures for repair or replacement of the damaged unit, as applicable.
Note: Use the checklist accompanying each shipment (if applicable) to verify that all items are present with the
shipment.
Step 15
Record the serial number and issue number of the equipment in accordance with local record-keeping
procedures, if necessary.
System Maintenance
Equipment Replacement
407
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only
To Next Page
Loading...
Need help?
General