Fujitsu 1FINITY L100 - Page 73

LED Descripons
Table 22
LED and Condion
LED Color Condion
SYS Green Normal operaon
Yellow Not ready (warm-up or SWDL in progress)
One of the following alarms is present:
■ sowareVersionMismatch
■ databaseLockedIlfViolaon
■ databaseLockedShelfProvModePresent
■ databaseVersionMismatch
■ rmwareBackwardCompableAll
■ rmwareDownloadOrAcvaonFailure
■ rmwareInitInProgress
■ rmwareVersionMismatch
■ shelfProvisioningMode
■ sowareStageInProgress
Red Equipment fault
Power-up state
Blinking red MEA
O Power o
ALM Yellow Minor alarm
Red Crical or major alarm
O No alarm
Enty Type Green Link up (with or without acve data communicaon)
Red Error condion (link down, module failure, module removal)
One of the following alarms is present:
■ LOS (eth)
■ POS (port)
Blinking red MEA
FAN1, FAN2 Green No error condion (normal operaon)
Red Error condion (fan failed, fan removed)
Blinking red Fan mismatch
O Power o
Unit Description
L110 Blade
73
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only