Honeywell E-Class Series - Page 118

# Name Value Type Description
5 FTP Enable Boolean Enables or Disables the FTP Server.
6
HTTP
Enable
Boolean
Enables or Disables the HTTP (WEB Pages)
Server.
7
LPD
Enable
Boolean
Enables or Disables the LPD (Line Printer
Daemon) services.
8
NetBIOS
Enable
Boolean Enables or Disables the NetBIOS services.
9
Netcenter
Enable
Boolean Enables or Disables the Netcenter services.
10
Gratuitous
ARP Period
Decimal
Value of the Gratuitous ARP Period in seconds.
0 = Disabled.
24 WIFI Type Decimal
WIFI Module type DO1 = 4.
Values are 0 – none or 4.
Values 1, 2 & 3 are legacy values.
802.3 – Wired Ethernet Configuration Parameters – Identifier ‘EW’
The ‘WE’ sub-group contains network configuration parameters that apply only to the
Wired Ethernet (802.3 Specification) ethernet interface. No sub-groups are currently
defined for the ‘WE’ sub-group of configuration parameters, only item-value pairs. The
‘Item-Value’ pairs within the ‘WE’ sub-group are defined by the following table:
# Name Value Type Description
1
DHCP
Enable
Char
Indicates if the DHCP Protocol is to be used to
automatically obtain all required network
addresses. Formally known as IP Discovery.
‘N’ = Static
‘B’ = BootP
‘Y’ = DHCP
Note: For Wired Ethernet BootP is considered
as same as DHCP.
2
Static
Printer IP
Address
String
Static IP Address for the Printer in dotted
decimal notation.
98
DPLCommand Reference