Honeywell E-Class Series User Manual

D-O Embedded WIFI Configuration Parameters – Identifier ‘DO1’
The ‘D01’ WIFI sub-group contains the configuration parameters that are specific to
the D-O WIFI solution that is based on the Green Hills / DeviceScape 802.11 software.
The ‘Item-Value’ pairs within the ‘DO1’ sub-group of the ‘WIFI’ sub-group are defined
by the following tables:
# Ezprint Name Value Type Description
1 CTC:SDNS:Y|N
Enable Static
DNS
String – 1 char
long
Using Static DNS or not. Default value
is “N”.
2 CTC:DNS1:***.***.***.***
Preferred DNS
Server
IP4 string format IP address for preferred DNS server
3 CTC:DNS2:***.***.***.***
Secondary
DNS Server
IP4 string format IP address for secondary DNS server
4 CTC:DSUF:<DNS Suffix> DNS Suffix String
64 characters string + 1 NULL
terminated character
DNS Settings
# Ezprint Name Value Type Description
20 CTC:I2:<value>
Inactive
Timeout
Unsigned short
Current connection will terminated if
no network traffic after a specific
interval. Default value is 30 seconds.
21 CTC:D:N|B|Y
IP address
method
Unsigned short
N = use static IP address
B = BootB enable
Y = DHCP enable
22 CTC:I:xxx.xxx.xxx.xxx
Active IP
address (READ
ONLY)
String
This field is holding the value of the
current active IP address. As the
result of the query request:
1. If “IP address method” is set to
“use static IP address”, this field
will hold the value of “Static IP
address”.
2. Otherwise, it will hold the value
of the current active IP address.
This field is using for reporting only.
In order to set the value for static IP
address, use item number 32.
Network Settings
DPL Command Reference
101

Honeywell E-Class Series Specifications

General

Brand	Honeywell
Model	E-Class Series
Category	Printer
Language	English