[SPE-bgp-af-vpnv4] peer 3.3.3.9 enable
[SPE-bgp-af-vpnv4] quit
[SPE-bgp] quit
# Configure the PE.
<PE> system-view
[PE] bgp 100
[PE-bgp] peer 2.2.2.9 as-number 100
[PE-bgp] peer 2.2.2.9 connect-interface loopback 1
[PE-bgp] ipv4-family vpnv4
[PE-bgp-af-vpnv4] peer 2.2.2.9 enable
[PE-bgp-af-vpnv4] quit
[PE-bgp] quit
Step 5 Configure the SPE.
# Configure the VPN instance.
[SPE] ip vpn-instance vpna
[SPE-vpn-instance-vpna] route-distinguisher 200:1
[SPE-vpn-instance-vpna] vpn-target 1:1
[SPE-vpn-instance-vpna] quit
# Specify the UPE for the SPE.
[SPE] bgp 100
[SPE-bgp] ipv4-family vpnv4
[SPE-bgp-af-vpnv4] peer 1.1.1.9 upe
# Advertise the default route of the VPN instance to the UPE.
[SPE-bgp-af-vpnv4] peer 1.1.1.9 default-originate vpn-instance vpna
[SPE-bgp-af-vpnv4] quit
Step 6 Verify the configuration.
After the configuration, CE1 has no route to the network segment of the interface on CE2, but
it has a default route with the next hop being UPE. CE2 has a BGP route to the network segment
of the interface on CE1. CE1 and CE2 can ping each other.
<CE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 7 Routes : 7
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 BGP 255 0 D 10.1.1.2 Vlanif30
10.1.1.0/24 Direct 0 0 D 10.1.1.1 Vlanif30
10.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
[CE1] ping 10.2.1.1
PING 10.2.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.2.1.1: bytes=56 Sequence=1 ttl=253 time=85 ms
Reply from 10.2.1.1: bytes=56 Sequence=2 ttl=253 time=70 ms
Reply from 10.2.1.1: bytes=56 Sequence=3 ttl=253 time=57 ms
Reply from 10.2.1.1: bytes=56 Sequence=4 ttl=253 time=66 ms
Reply from 10.2.1.1: bytes=56 Sequence=5 ttl=253 time=55 ms
--- 10.2.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 55/66/85 ms
[CE2] display ip routing-table
Route Flags: R - relied, D - download to fib
3 BGP/MPLS IP VPN Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
3-110 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)
To Next Page
Loading...
