----------------------------------------------------------------------
Peer-ID Status LAM SsnRole SsnAge KA-Sent/Rcv
----------------------------------------------------------------------
2.2.2.9:0 Operational DU Passive 000:00:01 8/8
3.3.3.9:0 Operational DU Passive 000:00:00 4/4
----------------------------------------------------------------------
TOTAL: 2 session(s) Found.
LAM : Label Advertisement Mode SsnAge Unit : DDD:HH:MM
[P1] display mpls ldp session
LDP Session(s) in Public Network
----------------------------------------------------------------------
Peer-ID Status LAM SsnRole SsnAge KA-Sent/Rcv
----------------------------------------------------------------------
1.1.1.9:0 Operational DU Active 000:00:02 11/11
3.3.3.9:0 Operational DU Passive 000:00:01 8/8
4.4.4.9:0 Operational DU Passive 000:00:00 4/4
----------------------------------------------------------------------
TOTAL: 3 session(s) Found.
LAM : Label Advertisement Mode SsnAge Unit : DDD:HH:MM
4. Configure a VPN instance on PE.
For the configuration procedure, see Example for Configuring the BGP/MPLS IP
VPN. The configuration details are not mentioned here.
5. Set up EBGP peer relation between the PE and the CE and import VPN routes.
For the configuration procedure, see Example for Configuring the BGP/MPLS IP
VPN. The configuration details are not mentioned here.
6. Set up the MP-IBGP peer relation between PEs and RRs.
# Configure PE1.
<PE1> system-view
[PE1] bgp 100
[PE1-bgp] peer 2.2.2.9 as-number 100
[PE1-bgp] peer 2.2.2.9 connect-interface loopback 1
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 2.2.2.9 enable
[PE1-bgp-af-vpnv4] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv4] quit
# Configure P1.
<P1> system-view
[P1] bgp 100
[P1-bgp] group P1 internal
[P1-bgp] peer P1 connect-interface loopback 1
[P1-bgp] peer 1.1.1.9 group P1
[P1-bgp] peer 3.3.3.9 group P1
[P1-bgp] peer 4.4.4.9 group P1
[P1-bgp] ipv4-family vpnv4
[P1-bgp-af-vpnv4] peer P1 enable
[P1-bgp-af-vpnv4] peer 1.1.1.9 group P1
[P1-bgp-af-vpnv4] peer 3.3.3.9 group P1
[P1-bgp-af-vpnv4] peer 4.4.4.9 group P1
[P1-bgp-af-vpnv4] quit
[P1-bgp] quit
# Configure P2.
<P2> system-view
[P2] bgp 100
[P2-bgp] group P2 internal
[P2-bgp] peer P2 connect-interface loopback 1
[P2-bgp] peer 1.1.1.9 group P2
[P2-bgp] peer 2.2.2.9 group P2
[P2-bgp] peer 4.4.4.9 group P2
3 BGP/MPLS IP VPN Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
3-150 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)
To Next Page
Loading...
