Huawei Quidway S9300

undo peer 4.4.4.9 enable
undo peer 1.1.1.9 enable
undo peer 2.2.2.9 enable
peer P2 enable
#
ipv4-family vpnv4
reflector cluster-id 100
undo policy vpn-target
peer P2 enable
peer P2 reflect-client
peer 1.1.1.9 enable
peer 1.1.1.9 group P2
peer 2.2.2.9 enable
peer 2.2.2.9 group P2
peer 4.4.4.9 enable
peer 4.4.4.9 group P2
#
ospf 1
area 0.0.0.0
network 100.2.3.0 0.0.0.255
network 100.3.4.0 0.0.0.255
network 100.1.3.0 0.0.0.255
network 3.3.3.9 0.0.0.0
#
return
l Configuration file of PE2
#
sysname PE2
#
vlan batch 30 50 70
#
ip vpn-instance vpna
route-distinguisher 100:1
vpn-target 1:1 export-extcommunity
vpn-target 1:1 import-extcommunity
#
mpls lsr-id 4.4.4.9
mpls
lsp-trigger all
#
mpls ldp
#
interface Vlanif30
ip address 100.3.4.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif50
ip address 100.2.4.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif70
ip binding vpn-instance vpna
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 70
port hybrid untagged vlan 70
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
interface LoopBack1
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-155