Huawei Quidway S9300

undo policy vpn-target
peer P1 enable
peer P1 reflect-client
peer 1.1.1.9 enable
peer 1.1.1.9 group P1
peer 3.3.3.9 enable
peer 3.3.3.9 group P1
peer 4.4.4.9 enable
peer 4.4.4.9 group P1
#
ospf 1
area 0.0.0.0
network 100.1.2.0 0.0.0.255
network 100.2.3.0 0.0.0.255
network 100.2.4.0 0.0.0.255
network 2.2.2.9 0.0.0.0
#
return
l Configuration file of P2
#
sysname P2
#
vlan batch 20 30 40
#
mpls lsr-id 3.3.3.9
mpls
lsp-trigger all
#
mpls ldp
#
interface Vlanif20
ip address 100.2.3.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif30
ip address 100.3.4.1 255.255.255.0
mpls
mpls ldp
#
interface Vlanif40
ip address 100.1.3.2 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
interface LoopBack1
ip address 3.3.3.9 255.255.255.255
#
bgp 100
peer 4.4.4.9 as-number 100
peer 1.1.1.9 as-number 100
peer 2.2.2.9 as-number 100
group P2 internal
peer P2 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
3 BGP/MPLS IP VPN Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
3-154 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)