Huawei Quidway S9300

ipv4-family vpn-instance vpna
peer 10.1.1.1 as-number 65410
import-route direct
#
ospf 1
area 0.0.0.0
network 1.1.1.9 0.0.0.0
network 100.1.2.0 0.0.0.255
network 100.1.3.0 0.0.0.255
#
return
l Configuration file of P1
#
sysname P1
#
Vlan batch 10 20 50
#
mpls lsr-id 2.2.2.9
mpls
lsp-trigger all
#
mpls ldp
#
interface Vlanif 10
ip address 100.1.2.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif 20
ip address 100.2.3.1 255.255.255.0
mpls
mpls ldp
#
interface Vlanif 50
ip address 100.2.4.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
interface LoopBack1
ip address 2.2.2.9 255.255.255.255
#
bgp 100
peer 4.4.4.9 as-number 100
peer 1.1.1.9 as-number 100
peer 3.3.3.9 as-number 100
group P1 internal
peer P1 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
undo peer 4.4.4.9 enable
undo peer 1.1.1.9 enable
undo peer 3.3.3.9 enable
peer P1 enable
#
ipv4-family vpnv4
reflector cluster-id 100
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-153