[PE2] interface vlanif 30
[PE2-Vlanif40] ip address 10.2.2.1 24
[PE2-Vlanif40] quit
Step 4 Configure the basic MPLS capabilities on the MPLS backbone network.
# Configure PE1.
[PE1] mpls lsr-id 1.1.1.9
[PE1] mpls
[PE1-mpls] quit
[PE1] interface vlanif 20
[PE1-Vlanif20] mpls
[PE1-Vlanif20] quit
# Configure the P.
[P] mpls lsr-id 2.2.2.9
[P] mpls
[P-mpls] quit
[P] interface vlanif 20
[P-Vlanif20] mpls
[P-Vlanif20] quit
[P] interface vlanif 30
[P-Vlanif30] mpls
[P-Vlanif30] quit
# Configure PE2.
[PE2] mpls lsr-id 3.3.3.9
[PE2] mpls
[PE2-mpls] quit
[PE2] interface vlanif 30
[PE2-Vlanif30] mpls
[PE2-Vlanif30] quit
Step 5 Create the remote CCC connection between the two PEs.
# Configure PE1: Enable MPLS L2VPN globally and create the remote CCC connection from
CE1 to CE2. Connect the incoming interface of PE1 to CE1 and the outgoing interface of PE1
to the P. Set the incoming label to 100 and the outgoing label to 200.
[PE1] mpls l2vpn
[PE1-l2vpn] quit
[PE1] ccc CE1-CE2 interface Vlanif 10 in-label 100 out-label 200 nexthop 10.1.1.2
# Configure PE2: Enable VLL globally and create the remote CCC connection from CE2 to
CE1. Connect the incoming interface of PE2 to CE2 and the outgoing interface of PE2 to the P.
Set the incoming label to 201 and the outgoing label to 101.
[PE2] mpls l2vpn
[PE2-l2vpn] quit
[PE2] ccc CE2-CE1 interface vlanif 40 in-label 201 out-label 101 nexthop 10.2.2.2
Step 6 Configure static LSPs on P for forwarding packets.
# Configure P: Configure a static LSP for forwarding packets from PE1 to PE2, and configure
another static LSP for forwarding packets from PE2 to PE1.
[P] static-lsp transit PE1-PE2 incoming-interface Vlanif 20 in-label 200 nexthop
10.2.2.1 out-label 201
[P] static-lsp transit PE2-PE1 incoming-interface Vlanif 30 in-label 101 nexthop
10.1.1.1 out-label 100
Step 7 Verify the configuration.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 4 VLL Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-43
To Next Page
Loading...
