EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Enable the routing protocol to ensure communication between the PEs.
2. Configure the basic MPLS capability on the S9300s on the backbone network and set up
an LSP and two MPLS TE tunnels between the PEs.
3. Configure VPN instances on the PEs and connect the CEs to the PEs.
4. Configure tunnel policies and apply the tunnel policies to the VPN instances.
5. Configure MP-IBGP for exchanging routing information between the VPNs.
Data Preparation
To complete the configuration, you need the following data:
l MPLS LSR IDs of the PEs
l Names, RDs, and VPN targets of the two VPN instances
l Names of the two tunnel policies
Procedure
Step 1 Enable the IGP protocol on the MPLS backbone network to ensure IP interworking between the
PEs.
# Configure PE1.
<Quidway> system-view
[Quidway] sysname PE1
[PE1] interface loopback 1
[PE1-LoopBack1] ip address 1.1.1.1 32
[PE1-LoopBack1] quit
[PE1] vlan 10
[PE1-vlan10] quit
[PE1] interface gigabitEthernet 1/0/1
[PE1-GigabitEthernet1/0/1] port hybrid pvid vlan 10
[PE1-GigabitEthernet1/0/1] port hybrid untagged vlan 10
[PE1] interface vlanif 10
[PE1-Vlanif10] ip address 100.1.1.1 30
[PE1-Vlanif10] quit
[PE1] ospf 1
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] network 100.1.1.0 0.0.0.3
[PE1-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# Configure PE2.
<Quidway> system-view
[Quidway] sysname PE2
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 2.2.2.2 32
[PE2-LoopBack1] quit
[PE2] vlan 10
[PE2-vlan10] quit
[PE2] interface gigabitEthernet 1/0/1
[PE2-GigabitEthernet1/0/1] port hybrid pvid vlan 10
[PE2-GigabitEthernet1/0/1] port hybrid untagged vlan 10
[PE2] interface vlanif 10
[PE2-Vlanif10] ip address 100.1.1.2 30
[PE2-Vlanif10] quit
[PE2] ospf 1
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 100.1.1.0 0.0.0.3
[PE2-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-27

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals