EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE1-mpls-ldp] quit
[PE1] interface vlanif 40
[PE1-Vlanif40] mpls ldp
[PE1-Vlanif40] quit
[PE1] interface tunnel2/0/0
[PE1-Tunnel2/0/0] ip address unnumbered interface loopback1
[PE1-Tunnel2/0/0] tunnel-protocol mpls te
[PE1-Tunnel2/0/0] destination 3.3.3.3
[PE1-Tunnel2/0/0] mpls te tunnel-id 13
[PE1-Tunnel2/0/0] mpls te bandwidth bc0 20
[PE1-Tunnel2/0/0] mpls te commit
[PE1-Tunnel2/0/0] quit
[PE1] ospf 1
[PE1-ospf-1] opaque-capability enable
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] mpls-te enable
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# Configure the P.
[P] mpls
[P-mpls] mpls te
[P-mpls] mpls rsvp-te
[P-mpls] quit
[P] interface Vlanif 20
[P-Vlanif20] mpls te
[P-Vlanif20] mpls rsvp-te
[P-Vlanif20] mpls te max-link-bandwidth 50
[P-Vlanif20] mpls te max-reservable-bandwidth 30
[P-Vlanif20] quit
[P] interface vlanif 30
[P-Vlanif30] mpls te
[P-Vlanif30] mpls rsvp-te
[P-Vlanif30] mpls te max-link-bandwidth 50
[P-Vlanif30] mpls te max-reservable-bandwidth 30
[P-Vlanif30] quit
[P] ospf 1
[P-ospf-1] opaque-capability enable
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] mpls-te enable
[P-ospf-1-area-0.0.0.0] quit
[P-ospf-1] quit
# Configure PE3.
[PE3] mpls
[PE3-mpls] mpls te
[PE3-mpls] mpls rsvp-te
[PE3-mpls] mpls te cspf
[PE3-mpls] quit
[PE3] interface vlanif 30
[PE3-Vlanif30] mpls te
[PE3-Vlanif30] mpls rsvp-te
[PE3-Vlanif30] mpls te max-link-bandwidth 50
[PE3-Vlanif30] mpls te max-reservable-bandwidth 30
[PE3-Vlanif30] quit
[PE3] interface tunnel2/0/0
[PE3-Tunnel2/0/0] ip address unnumbered interface LoopBack1
[PE3-Tunnel2/0/0] tunnel-protocol mpls te
[PE3-Tunnel2/0/0] destination 1.1.1.1
[PE3-Tunnel2/0/0] mpls te tunnel-id 31
[PE3-Tunnel2/0/0] mpls te bandwidth bc0 20
[PE3-Tunnel2/0/0] mpls te commit
[PE3-Tunnel2/0/0] quit
[PE3] ospf 1
[PE3-ospf-1] opaque-capability enable
[PE3-ospf-1] area0
[PE3-ospf-1-area-0.0.0.0] mpls-te enable
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 5 PWE3 Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-79

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals