[PE1-bgp-af-VPNB] quit
[PE1-bgp] quit
Configure CE1
[CE1] bgp 65410
[CE1-bgp] peer 10.1.1.2 as-number 100
[CE1-bgp] import-route direct
[CE1-bgp] quit
Configure CE2
[CE2] bgp 65410
[CE2-bgp] peer 10.2.1.2 as-number 100
[CE2-bgp] import-route direct
[CE2-bgp] quit
Configure PE1
[PE2] bgp 100
[PE2-bgp] ipv4-family vpn-instance VPNA
[PE2-bgp-af-VPNA] peer 10.3.1.1 as-number 65420
[PE2-bgp-af-VPNA] quit
[PE2-bgp] ipv4-family vpn-instance VPNB
[PE2-bgp-af-VPNB] peer 10.4.1.1 as-number 65420
[PE2-bgp-af-VPNB] quit
[PE2-bgp] quit
Configure CE3
[CE3] bgp 65420
[CE3-bgp] peer 10.3.1.2 as-number 100
[CE3-bgp] import-route direct
[CE3-bgp] quit
Configure CE4
[CE4] bgp 65420
[CE4-bgp] peer 10.4.1.2 as-number 100
[CE4-bgp] import-route direct
[CE4-bgp] quit
Step 8 Verify the configuration.
# Run the display ip routing-table vpn-instance command on the PE. You can view the routes
to the remote CE.
# Take the display on PE1 as an example:
[PE1] display ip routing-table vpn-instance VPNA
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: VPNA
Destinations : 3 Routes : 3
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/30 Direct 0 0 D 10.1.1.2 Vlanif30
10.1.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.3.1.0/30 BGP 255 0 RD 2.2.2.2 Tunnel1/0/2
[PE1] display ip routing-table vpn-instance VPNB
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: VPNB
Destinations : 3 Routes : 4
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.2.1.0/30 Direct 0 0 D 10.2.1.2 Vlanif20
10.2.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.4.1.0/30 BGP 255 0 RD 2.2.2.2 Tunnel1/0/1
BGP 255 0 RD 2.2.2.2 Vlanif10
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-33
To Next Page
Loading...
