Huawei Quidway S9300

VC Label : 23552
Peer Type : dynamic
Session : up
Tunnel ID : 0x20022,
*Peer Router ID : 1.1.1.9
VC Label : 23553
Peer Type : dynamic
Session : up
Tunnel ID : 0x20010,
**PW Information:
*Peer Ip Address : 1.1.1.9
PW State : up
Local VC Label : 23553
Remote VC Label : 23552
PW Type : MEHVPLS
Tunnel ID : 0x20010,
*Peer Ip Address : 3.3.3.9
PW State : up
Local VC Label : 23552
Remote VC Label : 23552
PW Type : label
Tunnel ID : 0x20022,
CE1, CE2, and CE3 can ping each other successfully. After you run the shutdown command
on GE 2/0/0.1 (to which the VSI is bound) of the UPE or PE, CE2 and CE3 cannot ping each
other successfully. This indicates that user data is transmitted through the PW of this VSI.
----End
Configuration Files
l Configuration file of the UPE
#
sysname UPE
#
vlan batch 10 20 30
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
vsi v123 static
pwsignal ldp
vsi-id 123
peer 2.2.2.9
#
mpls ldp
#
interface Vlanif10
l2 binding vsi v123
#
interface Vlanif20
l2 binding vsi v123
#
interface Vlanif30
ip address 100.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid tagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
6 VPLS Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
6-54 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)