Huawei Quidway S9300

network-entity 10.0000.0000.0001.00
#
interface Vlanif10
l2 binding vsi a1
#
interface Vlanif20
ip address 100.1.1.1 255.255.255.0
isis enable 1
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
isis enable 1
#
return
l Configuration file of ASBR-PE1
#
sysname ASBR-PE1
#
vlan batch 20 30
#
mpls lsr-id 2.2.2.2
mpls
#
mpls l2vpn
#
vsi a1 static
pwsignal ldp
vsi-id 2
peer 1.1.1.1
#
mpls ldp
#
isis 1
network-entity 10.0000.0000.0002.00
#
interface Vlanif20
ip address 100.1.1.2 255.255.255.0
isis enable 1
mpls
mpls ldp
#
interface Vlanif30
l2 binding vsi a1
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 30
#
interface LoopBack1
ip address 2.2.2.2 255.255.255.255
isis enable 1
#
return
l Configuration file of ASBR-PE2
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 6 VPLS Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-73