Huawei Quidway S9300

Interface Name : Vlanif10
State : up
**PW Information:
*Peer Ip Address : 2.2.2.2
PW State : up
Local VC Label : 23552
Remote VC Label : 23552
PW Type : label
Tunnel ID : 0x20020,
CE1 and CE2 can ping each other successfully.
Take the display on CE1 as an example.
<CE1> ping 10.1.1.2
PING 10.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=255 time=172 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=156 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=156 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=156 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=156 ms
--- 10.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 156/159/172 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 20
#
mpls lsr-id 1.1.1.1
mpls
#
mpls l2vpn
#
vsi a1 static
pwsignal ldp
vsi-id 2
peer 2.2.2.2
#
mpls ldp
#
isis 1
6 VPLS Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
6-72 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)