Main menu
Navigation Function/submenu
1 Status ■ Messages
─ Status report
─ Current warnings
Current faults
■ Statistics
■ Current pressure regulation
■ Current operating mode
■ DI/DO display
■ Diagram:
Nominal pressure/airend discharge temper‐
ature
For details of the
<Status>
menu, see table 29
“Status menu”.
2 Performance data Display of the following measured data:
■ System pressure pNloc
■ ADT (airend discharge temperature)
Increased speed ADT
■ Δp/Oil separator
■ Starting temperature
■ Temperature MCS (Main Control System)
■ Temperature, first IOM
3 Operating data Operating hours
■ Compressor
■ Load
■ Motor
■ Airend
■ SIGMA CONTROL 2
kWh counter
■ Active
■ Counting pulses
■ kWh
■ Reset
Load valve ON
4 Design and Function
4.6 Menus – overview
20
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3 9_9450 03USE
To Next Page