KAESER ESD.2C - Page 240

Navigation Function/submenu
4 Maintenance ■ Oil filter
■ Oil separator
■ Oil change
■ Air filter
■ Valve inspection
■ Belts / coupling inspection
■ Bearing lubrication
■ Motor bearings
■ Electrical equipment
■ Annual maintenance
5 Configuration For details of the <Configuration> menu, see ta‐
ble 30 “Configuration menu”.
6 Compressor clock Activate/deactivate compressor timer
Delete/reset the existing clock program
Entering weekdays and times:
■ Switching point 01:
■ Switching point 02:
■ Switching point 03:
■ Switching point 04:
■ Switching point 05:
■ Switching point 06:
■ Switching point 07:
■ Switching point 08:
■ Switching point 09:
■ Switching point 10
7 User ■ Name
Password
■ Current access level
8 Communication ■ Ethernet
■ COM module
Activating/deactivating the
«Remote control» key
For details of the <Communication> menu, see
table 33 “Communication menu”.
9 Machine test ■ TÜV check (safety relief valve)
10 Components ■ Compressor motor
─ Power switching
For details of the <Components> menu, see ta‐
ble 40 “Components menu”.
Tab. 28 Menu structure
4 Design and Function
4.6 Menus – overview
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
21