EasyManuals Logo

Lexmark T65 Series Service Manual

Lexmark T65 Series
665 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Diagnostic information 2-95
7462
Go Back
Previous
Next
925.76 Incorrect fuser or
fuser lamp detected.
Fuser type = 2
Fuser page count has
exceeded life.
The machine detected a 115 V
lamp in a 220 V machine. The
fuser lamp has an excessive
wattage rating.
1. Turn the machine off/on
and ensure the fuser unit
assembly is properly
installed.
2. Ensure the proper voltage
fuser is installed in the
machine.
3. Replace the fuser unit
assembly if problem
remains. Go to “Fuser unit
assembly removal on
page 4-16.
925.77 Incorrect fuser or
fuser lamp detected.
Fuser type = 2
Fuser page count has
exceeded life.
The machine detected a 115 V
lamp in a 220 V machine. The
fuser lamp has an excessive
wattage rating.
1. Turn the machine off/on
and ensure the fuser unit
assembly is properly
installed.
2. Ensure the proper voltage
fuser is installed in the
machine.
3. Replace the fuser unit
assembly if problem
remains. Go to “Fuser unit
assembly removal on
page 4-16.
927.01 Main cooling fan
failure.
The cooling fan is obstructed or
has failed.
1. Check for cooling fan
obstructions.
2. Check the connections on
the main cooling fan.
3. Replace the main cooling
fan. Go to “Main cooling
fan removal” on
page 4-14.
927.02 Print cartridge cooling
fan failure.
The cooling fan is obstructed or
has failed.
1. Check for cooling fan
obstructions.
2. Check the connections on
the main cooling fan.
3. Replace the print cartridge
cooling fan. Go to “Print
cartridge cooling fan
removal” on page 4-30.
927.03 Main cooling fan
control failure.
The main cooling fan does not
reach the specified speed.
4. Check for cooling fan
obstructions.
5. Check the connections on
the main cooling fan.
6. Replace the main cooling
fan. Go to “Main cooling
fan removal” on
page 4-14.
927.04 Main cooling fan
under speed failure
The main cooling fan does not
reach the specified speed.
1. Check for cooling fan
obstructions.
2. Check the connections on
the main cooling fan.
3. Replace the main cooling
fan. Go to “Main cooling
fan removal” on
page 4-14
.
Error
code or
message
Error contents Description/Action Possible repair actions

Table of Contents

Other manuals for Lexmark T65 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark T65 Series and is the answer not in the manual?

Lexmark T65 Series Specifications

General IconGeneral
BrandLexmark
ModelT65 Series
CategoryPrinter
LanguageEnglish

Related product manuals