4-226 Service Manual
7462
4-bin mailbox assembly deflector gate solenoid removal
1. Remove the 4-bin mailbox assembly top cover. See “4-bin mailbox assembly top cover removal” on
page 4-225.
2. Remove the screw (A) securing the deflector gate solenoid to the 4-bin mailbox assembly.
3. Carefully unroute the deflector gate solenoid cables from the cable clips under the top cover.
4. Disconnect the appropriate deflector gate solenoid cable from the controller card.
5. Pull the deflector gate solenoid and harness from the 4-bin mailbox assembly.
To Next Page
Loading...
Need help?
General
