Chapter 12 SD Additional Function
(2) PLC Backup
It is the function to back up the program stored in the PLC to the SD card.
In the PLC backup mode, the description of each item is as follows.
Select the storage medium to store the project data
Location where you will save the project data (folder)
Select operation mode
Set the PLC operations when inserting the SD card
PLC backup: Saving the PLC project to the SD card
Include PLC history
Check whether to back up the history saved in the PLC together during the PLC
If there is a file backed up to the SD card, checking whether to overwrite it.
(3) Comparison with the PLC
This function allows you to compare the project stored in the PLC with the project stored in the SD card.
To Next Page
Loading...
