Appendix 1 Flag List
5) NC channel flag
It displays the state of NC channel. NC channel flag is displayed as “_NCyy_...”
(yy indicates the NC channel No.( Decimal))
NC Ch. yy warning occurrence
NC Ch. yy alarm occurrence
NC Ch. yy cycle start begin information
NC Ch. yy cycle start finish information
NC Ch. yy target quantity reached signal
NC Ch. yy normal completion of program
execution
NC Ch. yy power failure in automatic operation
NC Ch. yy IPR operation state (0:stop,
1:running)
NC Ch. yy waiting end of motion state (0: not
waiting, 1:waiting)
NC Ch. yy AutoFIFO buffer state (0: empty,
another: buffer usage)
NC Ch. yy program access error code
NC Ch. yy IPR alarm information
NC Ch. yy cycle start state
NC Ch. yy feed hold state
NC Ch. yy automatic operation state
NC Ch. yy rapid traverse operation
NC Ch. yy cutting feed operation
NC Ch. yy target velocity (F command value)
NC Ch. yy command velocity
NC Ch. yy spindle target velocity (S command
value)
NC Ch. yy spindle command velocity
To Next Page
Loading...
