215184 297 Revision A
IMPORTANT:
Reel U-joint (C) has an extended lubrication cross and bearing kit. Stop greasing when greasing becomes difficult or if
U-joint stops taking grease. OVERGREASING WILL DAMAGE U-JOINT. Six to eight pumps is sufficient at first grease
(factory). As U-joint wears and requires more than six pumps, grease the joint more often.
Figure 8.66: Reel Shaft Bearings
A - Reel Shaft Right Bearing (One Place) B - Reel Center Bearing (One Place)
C - Reel U-joint (One Place) D - Reel Shaft left Bearing (One Place)
PERFORMING PREDELIVERY CHECKS
To Next Page
Loading...
